Home » Service Areas » Hanover
When equipment is aging and the next heating season is a few months away, the window to plan is now. A furnace that has been running longer than it should, a cooling system that struggles through humid stretches, or a boiler that needs more attention every winter are all situations where a call before the failure is worth more than a call after it. Hanover is a town where a lot of the housing stock has been around long enough to put serious hours on the original equipment, and the work we see most often reflects that.
We handle heating and cooling for homes, rental properties, and small commercial buildings throughout Hanover and the surrounding area. Repairs, replacements, seasonal maintenance, ductless installations, and boiler service are all part of what we do.
Call (781) 951-6995 to get a quote or get something scheduled. Every call gets the same attention, whatever the job size.
Booking a visit starts with a phone call. We ask about the equipment, the symptoms, and what kind of access the property allows. A price is confirmed before the visit is arranged, and you are told what the appointment covers before anyone comes out. We take calls every day from 9:00 AM to 8:00 PM.
For rental properties and small commercial spaces, we work around tenant access and business hours. A building that cannot go dark for half a day or a unit where a tenant has to be home are both situations we account for when scheduling. Let us know the constraints on the call and we will confirm what works.
A system that stops working in the middle of a cold stretch or a hot week is not something that can wait. We take emergency calls within our published hours, and the person who answers can scope the problem on the phone before anyone arrives. That means the visit is focused from the start rather than beginning with a blank diagnosis.
If the fault turns out to require a part that has to be ordered, we explain what that means for the timeline before any work is authorized. Nothing additional is started without a price being agreed first.
HVAC pricing depends on what the system is doing, what has to be accessed to fix it, and whether the right answer is a repair or a replacement. A refrigerant leak in an accessible location is a different job from one that requires pulling an air handler out of a tight mechanical space. A furnace that needs a new igniter is a different scope from one where the heat exchanger has cracked. The fault, the access, and the equipment condition all move the number.
What stays constant is when the price is confirmed. We scope the job on the call, a service-call fee covers the diagnostic visit, and what that fee includes is explained before anyone comes out. The repair or replacement quote comes after the system has been assessed, not before. That way the number you agree to reflects the actual job rather than a guess made over the phone.
There is no figure that covers all HVAC work, and a page that posts one is either describing the cheapest possible job or the most expensive. If you want to know what a specific repair or installation is likely to cost for your property in Hanover, the call is the right place to start.
Ducts that are separating at the joints, poorly sealed at the air handler, or running through unconditioned spaces like attics and crawlspaces lose a significant share of the conditioned air before it reaches the room it was meant for. The result is a system that runs longer than it should, energy costs that climb without any obvious cause, and rooms that never quite reach the set temperature even when the equipment itself is working correctly.
In older Hanover homes, ductwork is sometimes an afterthought from a renovation that added conditioned space without properly extending the distribution system. A room over a garage or a finished basement that was never part of the original layout often has duct runs that are undersized, poorly routed, or connected with materials that have since failed.
Duct sealing and repair address the distribution problem at the source. Accessible joints and connections can be sealed without demolition. Where the duct run itself is the issue, we assess what can be corrected and what the improvement in performance is likely to be before any work begins. The goal is to get the system delivering what the equipment is already producing, rather than replacing equipment that is actually working fine.
A room that runs hot in summer and cold in winter while the rest of the house is comfortable is rarely a random problem. It usually points to something specific: a duct run that is too long or too narrow for the load it is carrying, a register that is partially blocked or pointed the wrong way, an air handler that is not moving enough air through the system, or a zone that was never properly balanced after a renovation.
In multi-story homes, the top floor is often the hardest to condition. Heat rises and the duct runs to upper floors tend to be longer and more restrictive than those serving the ground floor. A mini-split installed in a room that has never been comfortable is often a cleaner solution than trying to redesign the duct distribution for one problem area.
The diagnostic visit is where the cause gets identified. We look at airflow, duct condition, equipment output, and thermostat behavior before recommending anything. A repair that fixes the wrong thing is not a repair.
Small offices, retail spaces, and multi-tenant commercial buildings often run rooftop package units rather than split systems. When a rooftop unit stops heating or cooling, or starts cycling incorrectly, the diagnostic covers the refrigerant circuit, the heat exchanger or heat strips, the blower, and the controls. Rooftop units also need seasonal attention before peak demand: a unit that has not been serviced before summer or before winter is working against itself from the first hot or cold day.
Covered above in its own section, but worth naming here as a standalone job. Duct repair is not always part of a larger equipment replacement. Sometimes the equipment is fine and the distribution system is the only thing that needs attention. We assess and quote duct work on its own when that is what the property needs.
A fall furnace or boiler tune-up and a spring AC or heat pump check are the two appointments that prevent most emergency calls. The fall visit covers burner performance, heat exchanger condition, igniter function, filter, and thermostat calibration. The spring visit covers coil condition, refrigerant pressure, condensate drainage, and airflow. Scheduling before the season starts means the system is ready when the load arrives.
A thermostat that is reading the wrong temperature, failing to communicate with the equipment, or simply too old to support a newer system is a straightforward fix. We diagnose the existing unit, check the low-voltage wiring, and install a replacement that works correctly with the heating and cooling equipment already in place. Smart thermostats that allow schedule programming and remote adjustment are a practical upgrade for any property where the occupancy pattern changes regularly.
The air handler and blower are responsible for moving conditioned air through the property. A blower motor that is starting to fail shows up as reduced airflow, uneven temperatures, or a system that runs longer than it should to reach the set point. The service visit covers motor condition, belt and bearing wear where applicable, and the condition of the coil and drain pan. A blower problem caught early is a repair. Left alone, it becomes a replacement.
For homes without existing ductwork, finished spaces that were never part of the original HVAC layout, and rooms that have always been uncomfortable, a ductless mini-split is often the most practical solution. The indoor unit mounts on the wall or ceiling, connects to an outdoor condenser through a small refrigerant line set, and delivers both heating and cooling without any ductwork required. We size the system for the space, handle the installation, and confirm the controls are set up correctly before the job is closed.
We cover Hanover and the surrounding communities throughout Plymouth County. That includes Rockland, Norwell, Hanson, North Pembroke, and Pembroke. Whether the property is in Hanover itself or in one of the towns nearby, the call gets answered the same way and the visit gets arranged the same way.
Coverage at a specific address is confirmed on the call. Anybody planning ahead in Hanover can start with our services page.
If you are in the area and need heating or cooling work handled, call (781) 951-6995 and we will confirm availability.
Call (781) 951-6995 and describe what the system is doing.
Let us know that the same problem has returned and reference the previous visit. A repeated fault changes the diagnostic approach, and that context helps scope the follow-up correctly.
Yes. A ductless mini-split is often the most practical way to add both heating and cooling to a home or a specific room that was never part of a ducted system. We size the equipment for the space, handle the installation, and set up the controls before the job is finished.
Call (781) 951-6995 to talk through what the property needs.
For the safety of the animals and to give the technician clear access to the equipment, it is a good idea to keep pets out of the work area during the visit. This is particularly true for attic, crawlspace, or utility room work where the access is confined. Let us know if there are animals on the property when you book.
If the repair requires a part that has to be ordered, we explain what that means for the timeline before any work is authorized. We tell you what the part is, what it costs, and when the repair can realistically be completed. Nothing additional is started without a price being agreed first, and the job does not move forward until you have decided how you want to proceed.
Yes. Older homes throughout this part of Plymouth County still run on boiler-based heating, and it makes up a meaningful share of the service calls we handle in the area. A visit covers system pressure, zone valves, the circulator pump, and the heat exchanger, not just the component that appears to be failing.
Call (781) 951-6995 and describe what the system is doing so we can scope the visit correctly.
A system that has been running poorly for a season or two, a room that has never been right, a boiler that has been limping through the winters: none of that fixes itself.
Call (781) 951-6995 to get a quote or schedule a visit.
We are open every day from 9:00 AM to 8:00 PM. Reach out to Revere HVAC Company and we will scope the job and tell you what it needs.
HVAC service covers these nearby towns as well: Norwell, Scituate, Cohasset, Hull, Westwood. See our local coverage area.
We handle the full range of heating and cooling work for homes, rental properties, and commercial spaces in Hanover and the surrounding area. The table below lays out what each service covers, who it fits best, and a practical note to help you decide what to schedule.
Call us at (781) 951-6995 to get a price and set up a visit.
A price is confirmed before anything is scheduled, so you know what the visit covers before anyone shows up.
| HVAC Service | What's Included | Best Suited For | What to Keep in Mind |
|---|---|---|---|
| Ductwork Repair & Sealing |
| Homes with uneven temperatures, rooms that never reach the set point, or energy bills that do not match how much the system runs | Leaky ducts push conditioned air into wall cavities and attics instead of the rooms being heated or cooled. Sealing fixes the distribution problem at the source. |
| Heat Pump Repair & Service |
| Homes and small commercial spaces running a heat pump as the primary heating and cooling source | Modern cold-climate heat pumps are rated to perform well into Massachusetts winters, but a reversing valve or refrigerant fault can cut that performance significantly. |
| Full System Installation & Replacement |
| Homeowners and property managers replacing an aging or failed system, or upgrading to a more efficient unit | Sizing is confirmed against the actual space being conditioned, not just matched to the old unit. Permits are handled where the job needs them. |
Call us at (781) 951-6995 to get a price and schedule a visit for any heating or cooling work in Hanover and the surrounding area.